Battery cover protection fits for TravelScoot battery
€29.95
Not in stock. We will take care of replenishment!🧑🔧
Product number:
12799.2
EAN:
4251507943024
Product information "Battery cover protection fits for TravelScoot battery"
Battery cover for TRAVELSCOOT batteries - Neoprene cover protects against weather, damage and cold! Keeps the battery at the right temperature when used in cold environments.
The battery cover is only recommended for temperatures below 15 degrees.
The protective cover is made from high-quality, elasticated neoprene, is easy to fit and adapts perfectly to the shape of the battery.
The neoprene ensures that the operating temperature of the battery is maintained, resulting in a longer range even on cool / cold days.
Tip: The battery should be stored at room temperature and only inserted into the drive unit shortly before the start of the journey.
Remove the battery cover for the charging process.
! With 420Wh batteries, care must be taken to ensure that the edges and corners of the aluminium case are de-radiused (rounded) and do not tear the neoprene as the cover is very tight; if necessary, de-radius (file down) sharp edges and corners beforehand. !
We use a cover from the bicycle sector that is sewn for Bosch batteries and is therefore not 100% suitable for the TravelScoot battery but still fulfils its purpose.
If soiled, you can clean the battery cover by hand with mild soap and water.
The battery cover is only recommended for temperatures below 15 degrees.
The protective cover is made from high-quality, elasticated neoprene, is easy to fit and adapts perfectly to the shape of the battery.
The neoprene ensures that the operating temperature of the battery is maintained, resulting in a longer range even on cool / cold days.
Tip: The battery should be stored at room temperature and only inserted into the drive unit shortly before the start of the journey.
Remove the battery cover for the charging process.
! With 420Wh batteries, care must be taken to ensure that the edges and corners of the aluminium case are de-radiused (rounded) and do not tear the neoprene as the cover is very tight; if necessary, de-radius (file down) sharp edges and corners beforehand. !
We use a cover from the bicycle sector that is sewn for Bosch batteries and is therefore not 100% suitable for the TravelScoot battery but still fulfils its purpose.
If soiled, you can clean the battery cover by hand with mild soap and water.
| --- SUBCATEGORIES ---: | PROTECTION | RAIN SUN CLIMATE DUST |
|---|
| Manufacturer "CONTEC"
Hermann Hartje KG
Deichstraße 120-122
D-27318 Hoya
E-Mail: poststelle@lfd.niedersachsen.de
Question : How does this protect the connection from getting wet? I thought it was the connection that required protection from the rain and not the main body of the battery? Is this just for the body of the TS battery or does it also cover that connector?
From : customer
Answer:
This accessory is for temperature control of the battery and not for water protection!
It is for a longer battery range on cool days.
The Akku COVER provides optimum protection for your battery. Made from a high-quality and elastic cellular rubber, the protective cover ensures that the operating temperature is maintained on cool days, such as in winter, and adapts perfectly to the shape of the battery. This reduces the self-discharge of the battery, allowing you to achieve a greater range even at minus temperature.
Concerning water protection - the yellow 252/274 Wh battery is water protected already - the 420 should be protected during hard rain within a plastic bag (! take care that no water gets inside the bag - this might be even worther than rain from above) but remove the plastic bag best after the pour! The connection needs not to be protected since water goes through and can not accumulate.
